spare part, trussrod adjustment key
allen wrench, 4.0mm, 30.0mm long
truss rod wrench, for 9/32" nut
truss rod wrench, for 5/16" Gibson nut
allen wrench set with holder and screws, 4 sizes, 1.5/2.0/2.5/3.0mm
allen wrench, 1.27mm, .050"
allen wrench, 5.0mm, 30.0mm long
truss rod wrench, 1/8 hex, set of 12
truss rod wrench, American Series bass, long handle, 3/16"
allen wrench kit for American Standard Bass, black
truss rod wrench, 'T-style', 1/8", red
phillips head truss rod wrench, adjustment without taking off the neck
pocket truss rod wrench, for 9/32" nut
pocket truss rod wrench, for 5/16" nut
long allen wrench for trussrod adjustment
string winder with string clipper and bridge pin remover
pickup routing template ST
pickup routing template TE bridge
pickup routing template TE neck
pickup routing template humbucker
pickup routing template P90
pickup routing template Filtertron
pickup routing template set PB, 2 pcs
pickup routing template set JB neck, 2 pcs
pickup routing template set JB bridge, 2 pcs
fret rocker
CruzTools tool kit
guitar/bass multi-tool
The Arch Work Station
step drill for tuner installation
stainless steel fret levelling file, hard chrome coating, 160x28x5mm
step gauge for guitar, measuring string height, fret crown heigth, nut slot height
chisel starter set of four wood chisels (3/6/12/24 mm) in a canvas roll-up tool bag
Groobar, aid to determine nut slot height, 4/set
fret setter for resetting frets without loosening the strings, for small, medium and wide frets
bronze fretting hammer, flat sides and curved side, total length 300 mm
fret hammer two heads, plastic/steel, weight: 225gr, head diameter: 25mm x 75mm, length: 330mm
fret saw guide
fret slot saw, carbon steel, universal cutting teeth, tooth spacing 1.25mm
fret puller, carbon steel, flat blade thickness 0,40mm
fret tang nipper, easy fret tang cutting job
fret cutter, high carbon steel, blade width 26mm, not suitable for stainless steel frets
stainless steel fret cutter with near-flat jaws, requires little filing of ends
flush cutting saw, 120x0.4mm blade
bracing saw, 66x0.2mm blade
wood saw rasp, open non-clogging blade design, high-carbon steel
stainless steel fingerboard radius gauge + string height check, for 7,25"- 9,5"-10"-12"-14"-16"
hex screwdriver allen wrench for comfortably adjusting bridge saddle, thickness: 1,5mm
guitar tech padded mat, with magnetised storing area for small parts
stainless steel scalpel holder #4, for blades 20 up to 23
surgical scalpel blades no.23, non-sterile, 20 pieces
surgical scalpel blades no.26, sterile, straight cutting edge, 20 pieces
Original Bullet guitar jack tightener, for 1/2" nuts
Bullet guitar jack tightener
ESP multi spanner
endpin jack wrench
Jack the Gripper
jack installation tool
Tele jack installation tool, hardened steel
soft touch pliers
guitar repair palette knives, set of 7
seam separation knife
crack repair tools, complete set
Pullit knob puller
Snapz bridge pin puller 2.0
mini string spreaders, set of 2
Fretbar understring leveler
Fret Dam for fretboard repair, teflon
fingerboard guards for guitar, set of 6
fingerboard guards for bass, set of 4
guitar shop tape deck
allen wrench, 1.5mm
allen wrench, 3.0mm
step drill for Rotomatic type tuners, 9.9mm and 7.8mm diameter
step drill for tuners, 8.6mm and 7.0mm diameter
stainless steel ruler, 15cm length
stainless steel ruler, 30cm length
stainless steel ruler, 60cm length
fret slot saw, carbon steel, thickness: 0,50 mm, universal cutting teeth, tooth spacing 1.25mm
fret slot saw, carbon steel, thickness: 0,60 mm, universal cutting teeth, tooth spacing 1.25mm
fret puller, carbon steel, blade width 5,0mm, flat blade thickness 0,40mm
fret puller, carbon steel, blade width 10,0mm, flat blade thickness 0,40mm
fret tang nipper, easy fret tang cutting job, for medium frets
fret tang nipper, easy fret tang cutting job, for jumbo frets
wood saw rasp, open non-clogging blade design, high-carbon steel, 200mm length
wood saw rasp, open non-clogging blade design, high-carbon steel, 250mm length
flexible long scraper, 25cm length
flexible long scraper, 18cm length
set of 5 scrapers small scraper set
set of two wide scrapers, size: 120 x 44mm, thickness: 0,40mm
wide straight scraper, size: 150 x 55mm, thickness 1,0mm
hex screwdriver allen wrench for comfortably adjusting bridge saddle, thickness: 1,5mm
Bullet 2.0 guitar jack tightener, for 1/2" nuts
Bullet 2.0 guitar jack tightener, for 11mm nuts
wiring jig for Gibson (TM) SG (TM)
wiring jig for Telecaster (TM)
wiring jig for P-Bass (TM)
wiring jig for Jazz Bass (TM)
pickup routing template for P90, body rout
pickup routing template for humbucker, pickguard rout
Fretbar understring leveler, 11,5 cm length
Fretbar understring leveler, 23 cm length
Fretbar understring leveler, 45,5 cm length
Gripper truss rod wrench, for 1/8" allen nut
Gripper truss rod wrench, for 3/16" allen nut
Gripper truss rod wrench, for 4mm allen nut
Gripper truss rod wrench, for 5mm allen nut
long allen wrench for trussrod adjustment, 5mm
long allen wrench for trussrod adjustment, 4mm
